china kat

[andyathome]

Just watched the youtube video.
typical kat, not enough power and radio settings not right.
bin the pump ( if it is a brushed , same as I got) swap out for a rc4wd setup. Valve bank and pump.
change up the radio settings and fit a relief valve. Replace all hoses and your digging.
rams may need some oil seals due to rubbish tolerances.
Not a knocker just answering a question from another forum.
I think you will be digging before I finnish mine.

cheers andy

[daddycool75]

So I've took Andy's advice, I've order the Valve bank as already had the pump
Now I need to work out the radio settings!!

Any help would be appreciated on how to set the radio!!!

My radio is a turnigy 9x, it has a smartieparts board so I can flash software to it.

cheers
Jamie