![]() |
|
|
|
#1
|
||||
|
||||
|
I'm sure I have surpassed the 500 loads mark with it already Tom, and 300+ were climbing the steep grade out of my basement this Spring. The B50 has become as much of a necessity as the JD850, when it quits - everything stops & I fix the trk right away, no substitutes!
![]() But same day after above pics taken, I hauled 3 loads & then entire rear axle stops working... wt? tear it down again to discover that I didn't get the wires pulled & secured tight enough & the outrunners cut the red motor wires. One motor was a quick fix, the other one - the new one I just put in, smoked the motor & esc too. ![]() ![]() So I did something a little different so that wouldn't happen again. ![]() Most of Sunday spent wrenching on the B50, but it's working fine again. Just about finished top cut... the distance between these two posts, the grass roots are more abundant & when spread & packed, the roots & sticky clay is clogging the cleaners bad! I gotta take the cleaners off to get that crap out! ![]() ![]() Cut down about 4" & across. ![]() Piling the contaminated dirt off to side here for now & haul it outside later.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
![]() |
| Currently Active Users Viewing This Thread: 3 (0 members and 3 guests) | |
|
|