Metal Excavator - Magom HRC MG1.4

[Digger_Bear]

Update. Started on the main body.

Decided to add a fuel inlet which will actually be the smoke unit filler tube





And primer



Mean while had a little play



https://www.youtube.com/watch?v=PHRkF2FxnN0

Then disaster :BH

One of the track drive sprockets came loose so a strip down to get to tighten up the grub screw :AR

[rc_farmer]

I have the same pump as you. Question....looking at the way you have it plumbed in on page 3, have you blown any lines or have you adjust the pressure? Also, is the pressure adjust screw that big brass screw on the bottom of the tank?

Thanks