|
|
|||||||
| Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
07-07-2017, 06:13 AM
|
||||
|
||||
Re: Volvo A40F
Are you sure you just didn't shrink a 1:1 machine? It's just so scale looking.
__________________
Emil G | MFZ Blocher Fendt 926 | RC4WD Volvo EC480 excavator | Carson LR 634 | Kenworth 6x6 hauler | Kenworth 6x6 dtrk My channel: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Construction site on Facebook: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Pictures on Instagram: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. 
|
|
#2
07-07-2017, 12:36 PM
|
|||
|
|||
|
Re: Volvo A40F
I took the A40 and the 374 excavator outside and thought that I make a little loading and unloading video, but that did not go as planned. First I blew the oil return hose on the 374 (again) and a little bit later the planetary gear unit on the A40 tear down it self
 The bogie axles are in a quite side stress when doing tight turns on heavy load. I was doing a tight turn on a concrete surface and I noticed that the bogie wheels tends to "fall under", if you guys know what I mean. And soon after that one wheel with the hub came off. Apparently the planetary gear outer hub is only press fittedNo real damages done, but I'm a bit worried will the hub stay in place after I push it in, maybe I use some retaining compound.   
__________________
Ari To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#3
07-09-2017, 03:32 AM
|
|||
|
|||
|
Re: Volvo A40F
What I did to fix the planetary gear problem was I tig welded few spots on the end of the drive shaft, so that the planetary gear hub can't move outwards.
I should have realized that when I was making the axles, but I didn't  
__________________
Ari To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
| Currently Active Users Viewing This Thread: 3 (0 members and 3 guests) | |
|
|
Hybrid Mode
