Metso Lokotrack LT120, Jaw Crusher.

[Azonic]

Originally Posted by Rimrock

Fine machined and printed parts you got there. Have you evaluated adjustable bottom opening/distance of the jaws?

Thanks!

I don't really understand how I can do that? Can you explain a bit more please.

[Rimrock]

Originally Posted by Azonic

Thanks!

I don't really understand how I can do that? Can you explain a bit more please.

I see now you got a joint for a threaded rod as part of fixing the lower end of the moving jaw. Than one got the possibility for a adjustment, say +/- 5mm should do. manual adjustment is fine

[Azonic]

Originally Posted by Rimrock

I see now you got a joint for a threaded rod as part of fixing the lower end of the moving jaw. Than one got the possibility for a adjustment, say +/- 5mm should do. manual adjustment is fine

Now I get what you was talking about, I thought it was the jaws on the chuck!

Yes I have adjustable jaws in the crusher, I can adjust them probably 10mm in each direction.