|
|
|||||||
| Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
03-20-2012, 11:40 PM
|
||||
|
||||
Re: Aeromax Daycab Dump 6x6 (Update: 3/18)
Gotta have them shackles in the springs Rod!
  And your tie rod is on the wrong side of the axle too! 
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe 
|
|
#2
03-25-2012, 02:56 PM
|
||||
|
||||
|
Re: Aeromax Daycab Dump 6x6 (Update: 3/18)
Some more progress! Got the body mounted. I knew after I had the trans mounted that I was about 1/8" to 3/16" out of the rear of the cab, so I had to build a small dog box to get everything enclosed. Also used the factory cab mount to add some real estate inside for mounting electronics.
I ordered a full set of topcad off road tires, once they come in & I get them mounted, I am going to check out the front axle & suspension to see if I need more clearance for the offroad tires...     
__________________
"If you build it, they will come" East Coast Mini Truckers To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#3
03-28-2012, 03:42 PM
|
||||
|
||||
|
Re: Aeromax Daycab Dump 6x6 (Update: 3/25)
Topcad's came in today!
  
__________________
"If you build it, they will come" East Coast Mini Truckers To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
