KOMATSU Excavator from Malaysia

[izzzul]

I dont have much update right now except spending time on 2nd excavator, all bodyworks is done and now waiting for electronics parts. Refer below.

And below is second video shootout, still in the middle of mastering the stick moves, need more time here definately..!
http://www.youtube.com/watch?feature...&v=l_KA10X4dl4

And my next project will be my favorite dump truck, it's a KOMATSU KAC960E below, will start a new thread when the project kicks in later, right now still on drawing papers



Refer my blog for more pictures
http://my-rc-page.blogspot.com/

[FlyingBeagle]

Wow, that thing will be huge. What would the scale dimensions be on that dump truck? Your excavator is an incredible piece of equipment. Thanks for sharing.

[sparkycuda]

When you do the 960E truck, the drive line can be very prototypical - a traction motor in each rear wheel assembly and electrically driven! That will be one large toy. What do you have in mind for getting tires? I've looked at doing a Komatsu HD785 truck (100 ton) in 1/14 scale, but have not found any tires that are close to diameter/width combination. Anyway, enjoying the excavator build and looking forward to the truck.

Ken

[izzzul]

Originally Posted by sparkycuda

When you do the 960E truck, the drive line can be very prototypical - a traction motor in each rear wheel assembly and electrically driven! That will be one large toy. What do you have in mind for getting tires? I've looked at doing a Komatsu HD785 truck (100 ton) in 1/14 scale, but have not found any tires that are close to diameter/width combination. Anyway, enjoying the excavator build and looking forward to the truck.

Ken

Ken,
I need a big and powerful drive-terrain/planetary gears here, still designing...size will try to come head to head with my Excav, at 1:14 scale, the length will be slight more than 1 meter, and 0.6meter in height I think..maybe slightly smaller than this, as to match all other gadgets...tires...i will custom made here, Tom (Thx Mr MODELMAN) had given me the info on the Si-Rubber mfgr, and i got the quote for the material i need, right now, to come up with the mold..before i order them, or second choice is to customize them as per my existing Volvo Dump Truck..(solid rubber and hand cut the thread)..

[izzzul]

Originally Posted by FlyingBeagle

Wow, that thing will be huge. What would the scale dimensions be on that dump truck? Your excavator is an incredible piece of equipment. Thanks for sharing.

Hi there,
Being thinking over the ratio here, if to match my 1:10 scale excavator, the dump truck will be out-sized my excav, so i'm planning for 1:14 or 1:16, so they both can 'play' together, i hope..