Driven front axle options?

[CustomRCmodels]

Originally Posted by WhiteWolf McBride

Willy:

My imagination, or is the front actually a little narrower than the outer rear axles? As I've got a semy with stock rear width, it'll help me tell if the deed
is not only do-able, but would look decent enough under the body...

Thanks for the assistance,
WhiteWolf

The fronts line up with the outer rears . Its just an illusion from the angle how that photo was taken . For a better comparison here with a King Hauler body :
all-wheel-drive rig , but with bigger and wider tires .
Therefore the front tires stick out from the fenders ( and the rear is much wider as stock )
http://customrcmodels.com/Trucks/new_6wd_project.htm
with stock semi-rims and tires they would be just covered by the fenders

here is a good photo from Travis's Mack :