Small Haul #5

[Smokin Joe]

Originally Posted by YoungGunz

Okay here is a video i made and at: 48 seconds the loader slows to almost a dead crawl and thats with the throttle all the way up so i was wondering what the deal is? the battery seems to be fine because once i turned it off and back on it ran fine and the reverse ran fine too... so i dont really know whats wrong i had it running for maybe 15 minutes before hand and i have the motors turned down to 80%. If somebody could help me out or give me some advice it would be greatly appreciated

J.D., it would appear this is a question for SmallHaul as he built the loader. If I may add, sending him a PM would be more appropriate. IMO Joe

[CrimsonCorsair]

Not to get too far in to it because I am no expert - but it appears the slow down starts immediately after the loader falls forward onto the trailer. I would look for something loose that may have shifted and made an electrical contact when the loader rocked forward. Battery? Esc? Receiver? Just my 2c from watching the video...

[SmallHaul]

J.D., that is unusual because the motors and esc are still putting out power because it would still turn and go backwards but, crawl forwards. I think it could have been a software glitch in the dual esc. Is it repeatable or has it ever happened before?